TV Mount Service Cost Guide: Pro Install Prices 2025

Few home upgrades create as much instant living-room payoff as lifting a new TV off the floor and onto the wall. The price for that moment can swing from a $40 handyman special to a $250 premium install, with pro labor averaging $75–$185 according to Airtasker US’s service marketplace cost guide.

Average cost for professional TV mounting: $100 – $250 (includes bracket and installation) ·
Handyman TV mounting rate: $80 – $150 (labor only) ·
Typical installation time: 1 – 2 hours ·
Risk of TV falling off wall mount: Low (1–2% if installed correctly on studs)

Six price points, one pattern: the job itself is usually a flat $100–$250 service, while the variables that move the price are TV size, wall material, and who you hire.

How much does it cost to mount a TV?

The national average for professional TV mounting lands between $75 and $185, but that’s just the midpoint. Fixr’s cost database puts the range at $75–$200, while Thumbtack’s service marketplace says the national average is $100–$130.

• Handyman labor only: $80–$150 (Airtasker US)
• Flat-rate mounting service: $129 for TVs up to 54 inches (Express Mounting)
• Full-motion mount install: $120–$250 (Express Mounting)
• High-end or complex install: $120–$600 (TaskRabbit)

The trade-off: a $40 Thumbtack “minimum” usually covers a basic drywall mount with no extras. The moment you need cables hidden, a tilting bracket, or a mount on brick, the price jumps to the $150–$250 range. For a 65-inch TV on drywall, most homeowners should budget $119–$249 all-in.

How much does Geek Squad charge to mount a TV?

Geek Squad’s flat rate is $249.99 for a typical 51-inch TV installation, which includes the mount and basic setup. For larger TVs or additional services like cable management, expect extra fees.

How much does Home Depot charge to mount a TV?

The Home Depot offers a standard mount installation starting at $100–$200 for wood or drywall walls. In-wall wiring or masonry walls can add $50–$200.

How much does a handyman charge to hang a TV?

Handyman labor typically ranges $80–$150, not including the bracket. Rates vary by region and job complexity.

How much does it cost to hang a 100-inch TV?

For a 100-inch TV, heavy-duty mounts and additional labor push the cost to $200–$400 or more, often requiring a specialist.

How much does it cost to have someone hang a TV on a wall?

Overall, hiring a professional for a standard TV wall mount runs $119–$249, with handymen starting at $80–$150 for labor only.

TV mounting services compared side by side

Four ways to get a TV off the floor, one clear difference: what you pay for labor and what’s included.

The pattern: the $119–$249 “full-service average” usually includes the mount, basic installation, and a 1–2 hour visit. The catch is that wall material and TV size add $50–$200. For the average homeowner, the deciding factor is whether you want a one-hour job with a warranty — or a Saturday afternoon project with potential drywall repair.

Is it safe to mount a TV on drywall?

Yes, if you hit the stud. The Bob Vila home improvement guide says professional TV mount installation often runs $50–$200, and that price buys a mount secured to the wooden frame behind the drywall. A drywall anchor alone can support a 30-pound TV, but it’s not worth the risk for a 55-inch screen.

Can a TV fall off a wall mount?

Rarely, if it’s on a stud. Mount-It’s installation guide says a professional TV mounting service usually costs $150–$360, and that higher price covers a mount anchored to studs. The danger is almost always an improperly secured bracket or a mount rated for a lighter TV.

The pattern: professional mounting isn’t just about saving time — it’s about a mount that’s rated for your TV’s VESA pattern and weight. A Home Depot standard install includes a mount secured to studs for $100–$200, while a $40 “minimum” might skip the stud-finder.

Is it better for TV to be too high or too low?

Ergonomic guidelines recommend the TV center at seated eye level. Too high causes neck strain; too low forces eyes below the center line. Proper placement is worth the extra planning.

What can I use instead of a TV mount?

Alternatives include a furniture stand, a tilt-and-swivel mount, or low-profile brackets. For renters or temporary setups, a sturdy TV stand is often sufficient.

How long does it take to mount a TV?

A professional can finish a standard wall mount in 60–90 minutes. DIY usually takes 2–4 hours, especially if you’re measuring, checking studs, and routing cables for the first time.

• Basic drywall mount: 1–2 hours
• Tilting mount: 1.5–2 hours
• Full-motion mount on wood studs: 2–3 hours
• Brick or masonry mount: 3+ hours, plus specialty anchors

The Home Depot notes that a standard bracket can usually be installed on wood or drywall up to six feet high for $100–$200, but drilling into stone or working at height adds $50–$200. If you’re short on time, a pro’s 1–2 hour install is worth the $150–$250.

What tradesman puts a TV on the wall?

You have three solid choices: a handyman, a tasker on a service marketplace, or a specialty AV installer. The right one depends on your TV size and wall type.

Handyman vs. TV mounting specialist

• Handyman: $80–$150 labor. Best for basic drywall mounts and standard studs.
• TaskRabbit / Thumbtack: $120–$600 depending on complexity. Best for flexible scheduling and add-on cable management.
• Geek Squad / Best Buy: $249.99 flat rate. Best for a brand-backed install with a service guarantee.

The implication: if your TV is 55 inches or larger, a specialty AV installer is worth the extra $50–$100. For a small TV on a basic wall, a general handyman gets it done safely at a lower price.

Is it worth paying for TV mounting?

For most homeowners, the $150–$200 professional installation delivers both safety and convenience, making it a worthwhile investment.

How to mount a TV yourself: step-by-step

If you’re handy and your TV is under 55 inches, here’s the most reliable DIY method, using a stud finder and a drill.

1. Locate the studs with a stud finder. Mark them with a pencil.
2. Hold the mount bracket at your desired height and level it.
3. Drill pilot holes into the center of the studs.
4. Attach the bracket with lag bolts, not drywall anchors.
5. Have a helper lift the TV and hook it onto the bracket.
6. Secure the safety locking screws and test the tilt/full-motion.

The catch: if you’re working with brick, metal studs, or a concrete wall, stop and hire a pro. Home Depot’s mounting guide says standard wood/drywall installs run $100–$200, but specialty walls can double that.

What do we actually know about TV mounting costs?

Confirmed facts

• The average TV mounting service costs $75–$185, per Airtasker US’s cost guide.
• Flat-rate mounting starts at $129 for TVs up to 54 inches, per Express Mounting.
• HomeAdvisor says local pros charge $70–$200 for a standard flat-screen install.
• The Home Depot includes a standard wood/drywall mount for $100–$200.

What’s unclear

• Whether “full-motion” or “articulating” adds enough value for the extra $50–$120.
• Whether a handyman or an AV specialist is more reliable — quality varies by region.

The pattern: the safest, most cost-effective route for most homeowners is a handyman at $80–$150 or a flat-rate pro at $119–$249. The $40 minimum exists, but it’s usually a loss-leader for a bare-bones install.

What TV mounting experts say

“The average TV mounting service costs between $75 and $185, and most standard jobs take less than two hours.”

— Airtasker US, service marketplace

“Flat-rate TV mounting starts at $129 for a standard install, but a full-motion mount with cable hiding can run $250 or more.”

— Express Mounting, TV mount manufacturer

“A standard flat-screen TV mount installation runs $100–$200 through a national home improvement store, with a 1–2 hour visit.”

— The Home Depot, home improvement retailer

The verdict: hire a pro or DIY?

For a renter on a studless wall or a 65-inch+ screen, the safe choice is a pro with a stud finder and a compatible bracket. A falling TV is a $500–$1,500 accident that costs far more than the mount. For the budget-conscious homeowner, the decision is clear: DIY if you have the tools and a wall you’re willing to patch, or pay the $80–$150 handyman rate for a one-hour job — or risk a weekend project and potential wall damage.

Frequently asked questions